Nederlands (Nederland)
CIMGUARD® 90
Item No.
C26025
Water based synthetic corrosion preventive Description Cimguard 90 is a synthetic, water-dilutable, indoor corrosion preventative for ferrous metals. It is designed to leave a thin (not tacky or oily) film, which is easily removed by aqueous cleaners. Application The level of corrosion protection
REQUEST EXTRA INFORMATION
Please enter below information and your request
E-mail was sent successfully.
Your email not sent
Item id : C26025
Description
Water based synthetic corrosion preventive
Description
Cimguard 90 is a synthetic, water-dilutable, indoor corrosion preventative for ferrous metals. It is designed to leave a thin (not tacky or oily) film, which is easily removed by aqueous cleaners.
Application
The level of corrosion protection provided by Cimguard 90 depends on product concentration, humidity, and air temperature. Cimguard 90 can be applied in spray, dip operations, and can be used in the final rinse stage of multi-stage parts washers. Cimguard 90 recommended concentrations:
1. Final rinse after immersion or spray cleaning, 2-5%.
2. Immersion bath rust preventative after machining, up to 20%.
3. Final rinse after tumbling or de-burring operations, 2-5%.
4. Can also be added directly to de-burring and tumbling operations at concentrations of 1 - 2% to prevent “flash” rusting of parts.
Always let metal parts dry before packing and/or storage. Heating (max. 40C) the solution will decrease the drying time. Do not rinse metal parts after exposure to Cimguard 90; coating is instantaneous and final.
Description
Cimguard 90 is a synthetic, water-dilutable, indoor corrosion preventative for ferrous metals. It is designed to leave a thin (not tacky or oily) film, which is easily removed by aqueous cleaners.
Application
The level of corrosion protection provided by Cimguard 90 depends on product concentration, humidity, and air temperature. Cimguard 90 can be applied in spray, dip operations, and can be used in the final rinse stage of multi-stage parts washers. Cimguard 90 recommended concentrations:
1. Final rinse after immersion or spray cleaning, 2-5%.
2. Immersion bath rust preventative after machining, up to 20%.
3. Final rinse after tumbling or de-burring operations, 2-5%.
4. Can also be added directly to de-burring and tumbling operations at concentrations of 1 - 2% to prevent “flash” rusting of parts.
Always let metal parts dry before packing and/or storage. Heating (max. 40C) the solution will decrease the drying time. Do not rinse metal parts after exposure to Cimguard 90; coating is instantaneous and final.
Attachments
Reviews (0)
There are no reviews yet.