CIMTECH® A32
Art nr.
C25019
Heavy-duty synthetic metal working fluid Application Cimtech A32 is a new type of synthetic fluid for heavy duty machining operations on a wide range of materials. It is designed primarily for demanding operations in aluminium but hard and difficult alloys have proven to be no problem either.
REQUEST EXTRA INFORMATION
Please enter below information and your request
E-mail was sent successfully.
Your email not sent
Item id : C25019
Omschrijving
Heavy-duty synthetic metal working fluid
Application
Cimtech A32 is a new type of synthetic fluid for heavy duty machining operations on a wide range of materials. It is designed primarily for demanding operations in aluminium but hard and difficult alloys have proven to be no problem either. Cimtech A32 can be used in individual machines as well as in central systems. Cimtech A32 can only be used with demineralised water.
Features and benefits
Cimtech A32 is designed primarily to improve productivity in demanding machining operations on aluminium and alloys such as stainless steel, titanium, nickel and other aerospace alloys. For use with other metals and processes please consult the compatibility guide on page two, or contact your local Cimcool representative.
Cimtech A32 is highly cost effective, due to its low make-up rates and long fluid life. Cimtech A32 provides excellent lubrication and cooling, and does not foam when used at recommended concentration. The complete transparency of the mix enables good visibility in the cutting zone, and it has a magnificent washing action and superior cleanliness. In addition, Cimtech A32 rejects tramp oil and is low misting. The ingredients in Cimtech A32 provide no nourishment for bacteria ensuring exceptional long fluid life. Operators, otherwise sensitive to traditional fluids, generally appreciate the low pH (7.9), complete transparency and neutral smelling properties of Cimtech A32. Cimtech A32 does not contain sulphur, chlorine, formaldehyde, diethanolamine or boron. Additives should only be used after consulting a Cimcool representative.
Application
Cimtech A32 is a new type of synthetic fluid for heavy duty machining operations on a wide range of materials. It is designed primarily for demanding operations in aluminium but hard and difficult alloys have proven to be no problem either. Cimtech A32 can be used in individual machines as well as in central systems. Cimtech A32 can only be used with demineralised water.
Features and benefits
Cimtech A32 is designed primarily to improve productivity in demanding machining operations on aluminium and alloys such as stainless steel, titanium, nickel and other aerospace alloys. For use with other metals and processes please consult the compatibility guide on page two, or contact your local Cimcool representative.
Cimtech A32 is highly cost effective, due to its low make-up rates and long fluid life. Cimtech A32 provides excellent lubrication and cooling, and does not foam when used at recommended concentration. The complete transparency of the mix enables good visibility in the cutting zone, and it has a magnificent washing action and superior cleanliness. In addition, Cimtech A32 rejects tramp oil and is low misting. The ingredients in Cimtech A32 provide no nourishment for bacteria ensuring exceptional long fluid life. Operators, otherwise sensitive to traditional fluids, generally appreciate the low pH (7.9), complete transparency and neutral smelling properties of Cimtech A32. Cimtech A32 does not contain sulphur, chlorine, formaldehyde, diethanolamine or boron. Additives should only be used after consulting a Cimcool representative.
Bijlagen
Beoordelingen (0)
Er zijn nog geen beoordelingen.